Search results

...essage after the CC lists. These are required to be very detailed and will help the reviewer to check whether changes have been addressed. An example of a specify '-w'. Unfortunately, not all versions of iptables have the

<pre>xl block-attach 0 phy:/dev/domU/helium xvda w</pre> * mode should be 'w' or 'r'

xl sched-credit -d [domain] -w [weight]

* <code>xl</code> does not support the <code>w!</code> notation to share disks between several DomU's ...m xen-devel mailing list]. Also, please describe your use-case, which will help developers decide how important the missing feature is.

* use "<code>xm sched-credit -d Domain-0 -w 512</code>" to give dom0 weight of 512, giving it more (up to twice as much ...e on your dom0 distribution. See the documentation of your distro for more help.

* [http://www.mediawiki.org/wiki/Help:Contents MediaWiki Help Contents] * [http://www.mediawiki.org/wiki/Help:Formatting MediaWiki Formatting]

...require some hackery to get them build with 2.6.3x kernels (see below for help). disk = [ 'phy:/dev/vg01/vm01-disk0,hda,w', ',hdc:cdrom,r' ]

disk = ['phy:vm_volumes/root.dokeos,sda1,w' ,'phy:vm_volumes/var.dokeos,sda3,w'

<pre>disk = ['tap:aio:<FILENAME>,sda1,w']</pre> <pre>disk = ['tap:qcow:<FILENAME>,sda1,w']</pre>

disk = [ "tap:tapdisk:aio:/path/images/disk.img,xvda,w" ] disk = [ "tap:tapdisk:vhd:/path/images/disk.vhd,xvda,w" ]

{{Info|This page is out of date. See https://help.ubuntu.com/community/Xen to install the latest version of Ubuntu as a Xen D disk = ['phy:vg_f13/ubuntu01,xvda,w']

## <tt>xl sched-credit2 -d vm1 -w 1024</tt>

daunting task. Hopefully, this guide will be of some help, and allow you to make We created an open-source repository for various tools that can help with performance analysis: [https://github.com/perf101/scripts https://gith

...especially as the number and type of guests you support grows. PvGrub can help solve this problem. It implements GRUB in a stub domain which in turn loads disk = [ 'phy:/dev/vg0/vm_superchunk-root,xvda1,w', \

...hda1,w','file:/vserver/mail/guest_swap256M.img,hda2,w','phy:data/mail,hda3,w']

<!-- ## Please edit system and help pages ONLY in the moinmaster wiki! For more --> For more commands you can use xl help. For example, if you have four different DomU's installed, this will show:

...[ 'file:/system.img,hda,w', 'file:/disk1.img,sda,w', 'file:/disk2.img,xvda,w', ]

...hese old boxes were actually working fine in Xen prior to this patch, just w/out 3d acceleration. Pid: 1861, comm: X Tainted: G W 2.6.32.15-clean4 #28

* Architecture (x86, x86 w/ pae, x86_64, vt/svm) ...written to or read from Xenstore, then you may turn on xenstore tracing to help debug the problem:

As far as I've found out yet, XCP 1.4.90 (with 6.0.99 version patch) w/ XenCenter 6.0 supports the following exciting features for free:

...share it anyway, you can try changing the mode to "r" (for read only) or "w!" (to force read-write multiple mount). In your domU.cfg: 'phy:/dev/data/bla-disk,sda1,w' => 'phy:/dev/data/bla-disk,sda1,r'

...ared across all the xen domUs when you use the parition as 'r' instead of 'w' when defining the disk.

HVM | -> no PV timesource, no ind. wallclock, run NTP | -> w/o PV time PVHVM extensions, no ind. wallclock, run NTP | | | -> /w PV time source, ind. wallclock always 1, run NTP |

<!-- ## Please edit system and help pages ONLY in the moinmaster wiki! For more --> disk = /some/path/disk:vhd:hda:w:disk

...[https://bugzilla.redhat.com/show_bug.cgi?id=978443 virt-install without -w bridge=<name> using xen is unable to start] which

disk = [ 'phy:/dev/vol1/netbsd3.0,0x3,w' ]

...he domains ("xm list"), shutting down a domain ("xm destroy"). Running "xm help" will show all possibilities. disk = ['file:/home/work/downloads/tmp/ttylinux-xen,hda3,w']

...in this guide applies to XCP (Xen Cloud Platform). If you are looking for help with XCP, also see [[XCP]] and [[XCP_Command_Line_Interface]]. ...usly “different” to install. Fortunately, though, there are tools that help us prepare “images” or snapshots of the operating systems to run inside

'phy:/dev/vgxen/suse-disk,xvda,w', # alternative: 'file:/var/lib/xen/images/suse-disk.img,xvda,w',

* usar "xm sched-credit -d Domain-0 -w 512" para dar al dom0 un peso de 512, dándole así más tiempo de CPU ( ha

...sted. Feel free to add any test results to the table. By doing so you will help others and yourself. disk = [ 'phy:/dev/loop0,xvda,w' ]

# "command[check_disk1]=/usr/lib/nagios/plugins/check_disk -w 10% -c 5% -p /dev/sda1"

disk = [ 'phy:/dev/vol0/lvm_volume0,xvda,w' ]

disk = ['phy:/dev/VG/debian-installer,xvda,w'] ...4-amd64-i386-netinst.iso,xvdd:cdrom,r', 'phy:/dev/VG/debian-installer,xvda,w']

...information in the documentation, but it isn't always in a form that will help someone use a particular feature for the first time. Or, the information i * Using Xen Project with common applications (see [http://www.xenproject.org/help/questions-and-answers/citrix-netscaler-not-working-in-xen-4-4-0.html this Q

...hda1,w','file:/vserver/mail/guest_swap256M.img,hda2,w','phy:data/mail,hda3,w']

...outstanding bugs, and now have excellent automated test infrastructure to help us maintain this level of quality. ...sed, but I hope this won't be required. One of the key features which will help both small and large system performance is support for NUMA-aware memory al

...e side-effects may exist under different H/W C-states implementations or H/W configurations, so that user may occasionally observe latency or system tim ==== For h/w supporting ACPI C1 (halt) only (BIOS reported in ACPI _CST method) ====

; mode : 'r' for read-only, 'w' for read-write.

dom0# sysctl -w net.ipv4.ip_forward=1 dom0# sysctl -w net.ipv4.conf.eth0.proxy_arp=1

disk = [ 'file:/share/vm/OVM_EL5U1_X86_HVM_4GB/system.img,hda,w!', ] disk = [ 'file:/share/vm/OVM_EL5U1_X86_HVM_4GB/system.img,hda,w!', ]

[ 3.610253] Pid: 0, comm: swapper Tainted: G W 3.0.0-05689-g3831864-dirty #1

disk = [ 'phy:/dev/xen/xen4-freebsd72-00,hda,w', 'file:/home/download/freebsd-7.2-RELEASE-i386-dvd1.iso,hdc:cdrom,r' ]

# xl sched-credit -d 0 -w 512 disk = [ "/root/images/debian_squeeze_amd64_standard.raw,raw,xvda,w" ]

|Sharing storage across DomU's via <code>w!</code> in virtual machines configuration files in disk settings

disk = [ "phy:/dev/VolGroup00/c58x64pv,xvda,w" ] disk = [ 'phy:/dev/VolGroup00/c59x64hvm,hda,w', 'file:/root/iso/CentOS-5.9-x86_64-bin-DVD-1of2.iso,hdc:cdrom,r' ]

chmod +w /sys/bus/pci/drivers/pci-stub/new_id chmod +w "/sys/bus/pci/devices/${device}/driver/unbind"

'/dev/mapper/xen-win2,,hda,w', '/dev/mapper/xen-win2,,hda,w'

* PVH mode (w/ Linux) * Testing: new libxl w/ previous versions of xl

disk = [ 'phy:/dev/vgroup/domu-netbsd,0x3,w' ]

# xl sched-credit -d u0 -w 512

To read the CLI help, try: $ xenops-cli add --help

disk = ['phy:/dev/left/ubuntu,xvda,w'] disk = [ 'drbd:drbd-vm,xvda,w' ]

disk = [ 'drbd:drbd-vm,xvda,w' ]

...d concerns about the manner in which functional deprecation (e.g. broken h/w features) is handled in the hypervisor (e.g. disabling the IOMMU as part of

Xen 4.3 includes support for [http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.ihi0048b/CACJEIAI.html ARMv7-A Virtualization * <code>xl reboot</code> now accepts the <code>-w</code> option to wait for a VM to reboot

'phy:/dev/guests/freebsd,hda,w',

maintainers and the release coordinator will use to make decisions; you can help * new libxl w/ previous versions of xl

disk = [ 'phy:/dev/loop0,xvda,w' ]

'phy:/path/to/block/device,xvda,w',

<code>iperf -c <destination-ip> -w 256k -l 256k -t 60 -i 5 -P <num-tcp-streams></code>

disk = [ '/data/s0-efi.qcow2,qcow2,hda,w' ] (Checkout QEMU's help of -chardev for more options.)

disk=['phy:/dev/sdb1,xvda,w']

disk = [ 'tap2:remus:bkup:9000|aio:/dev/vmdisk/myguest,xvda1,w' ]

...er compose the COLO-proxy. We can get better performance with COLO-proxy's help.<br> disk = [ 'format=raw,devtype=disk,access=w,backendtype=qdisk,vdev=hda,colo,colo-host=192.168.3.2,colo-port=9001,colo-e

disk = ['phy:/dev/zvol/tank/debian,xvda,w'] disk = ['phy:/dev/zvol/tank/debian,xvda,w']

disk = [ "phy:/dev/g/F21-PV-32,xvda,w" ]

<pre>efibootmgr -w -L Xen -l "\EFI\Xen\xen.efi" -c</pre> [root@localhost Xen]# efibootmgr -w -L Xen -l "\EFI\Xen\xen.efi" -c

disk = [ "phy:/dev/g/F21-PV-32,xvda,w" ]

%w{kernel-xen xen xen-tools openvswitch-kmp-xen}.each do |pkg|

disk = [ "phy:/dev/g/F21-PV-32,xvda,w" ]

<pre>disk = [ 'format=raw,devtype=disk,access=w,vdev=hda,backendtype=tap,filter=colo,filter-params=192.168.3.1:9000,target=

* <code>xl</code> does not support the <code>w!</code> notation to share disks between several DomU's

: 2000 Yan An Road (W) ...hen you look in detail we actually do a lot better. However, this does not help the emerging perception

'phy:/dev/HDD0/devuan-disk,xvda2,w', 'phy:/dev/HDD0/devuan-swap,xvda1,w',

...om0 restart. This will make Dom0 less critical to a Xen Project system and help us move towards a more robust and secure architecture in the future. More w ...f8781c013dd1b909edda22f7b57720 1d82792]: xen/arm64: correctly emulate the {w, x}zr registers [Julien Grall]

|Wei W Wang

...h''': It is now possible to passthrough USB devices to HVM guests with the help of QEMU. ...it;h=9fc57406d5b629ad0190b3b3d2d034f88896d5cb 9fc5740]: tools/console: fix help string in client [Wei Liu]

disk = ['file:/root/xxx.img,hda,w', 'phy:/dev/cdrom,hdc:cdrom,r'] #disk = ['file:/var/lib/xen/images/winxp.img,hda,w','phy:/dev/cdrom,hdc:cdrom,r']

disk = ['file:/home/root/xxx.img,hda,w', 'phy:/dev/cdrom,hdc:cdrom,r'] #disk = ['file:/var/lib/xen/images/winxp.img,hda,w','phy:/dev/cdrom,hdc:cdrom,r']

It a good figure that help you to understand LVM easily : disk=['phy:/dev/Xen/Fedora,hda,w','file:/home/mohsen/windows7.iso,hdc:cdrom,r']

disk = [ "file:/home/mohsen/Windows7.img,xvda,w" ] ...he major subsystems of the kernel. The Selinux provide a mechanism that by help it malicious or flawed applications can't bypass security mechanisms. By de

...a=commit;h=8c935f5ff1cac422b4de21cbab69e13d2ebb25be 8c935f5ff1]: x86: add "w" flag to .init.data section definition [Daniel Kiper] ...69452c1456fcefaa9d7505c06b82c48b459dff 5c69452c14]: target-ppc: add vprtyb[w/d/q] instructions [Ankit Kumar]

...supposed to work only with newest R-Car Gen3 SoCs revisions (H3 ES3.0, M3-W+, etc.).

...i only covers Salvator-XS + H3 ES3.0 configuration, the R-Car M3 ES3.0 (M3-W+) SoC is also supported. It is possible to run Xen on other "board & SoC" c