- 1 History
- 2 Xen Qemu Trees
- 3 Why is qemu-system-i386 used even on x86_64 and even non-x86?
- 4 Using a distribution supplied version of Qemu
- 5 Xen build system integration
- 6 Use with SeaBIOS
- 7 New features
- 8 Difference with qemu-xen-traditional
Historically Xen contained a fork of qemu with Xen support added, known as 'qemu-xen-traditional' in the xl toolstack. However since Qemu 1.0 support for Xen has been part of the mainline Qemu and can be used with Xen from 4.2 onwards. The xl toolstack describes this version as 'qemu-xen', and this became the default from Xen 4.3 onward.
The 'qemu-xen-traditional' fork remains available to support guest OSs that were installed using it. After a Dom0 upgrade to a newer Xen version the new 'qemu-xen' device model is recognized as a significant hardware change. Some guest operating systems, especially non-free systems that rely on licensing bound to a specific hardware, do not behave nicely when hardware is changed under their feet.
Xen Qemu Trees
The 'qemu-xen' code is maintained upstream in the qemu.org git trees. In addition the Xen project also maintains its own stable branch of qemu, based on the upstream stable branches with a small number of additional fixes for Xen. These can be found on xenbits in 'qemu-upstream-VERSION.git' e.g. qemu-upstream-unstable.git, qemu-upstream-4.3-testing.git.
By default the Xen build system will clone and build both versions of Qemu from the branches on xenbits.
Why is qemu-system-i386 used even on x86_64 and even non-x86?
QEMU in a Xen system only provides device model (DM) emulation and not any CPU instruction emulation, so the nominal arch doesn't actually matter and Xen builds i386 everywhere as a basically arbitrary choice.
It happens that the Xen DM part of QEMU is quite closely tied to the x86 scaffolding for various historical reasons, so we end up using `qemu-system-i386` even e.g. on ARM!
Using a distribution supplied version of Qemu
By default Xen will build its own copy of the upstream qemu tree from a branch hosted on xenbits. However it is possible to use Xen with the qemu supplied by the distribution, assuming it is new enough and is compiled with Qemu support.
You can configure this at build time by using:
This will cause the Xen toolstack to use binary when launching qemu. If you specify the 'with-system-qemu' option but do not specify a path then the default will be to call qemu-system-i386 using the system's default search path.
Note that Xen does not use Qemu for processor emulation and therefore makes no distinction between qemu-system-i386 and qemu-system-x86_64, both of which can be used with either 32- or 64-bit guests. By default Xen uses
As well as building Xen with support for the system version of Qemu it is also possible to override the binary to be used via device_model_override field in your xl vm configuration (other toolstacks may or may not expose this option). For example:
device_model_override = "/usr/bin/qemu-system-x86_64"
Note that it is you responsibility to ensure that 'device_model_version' is set to either 'qemu-xen-traditional' or 'qemu-xen' as appropriate when overriding the binary to use.
Xen build system integration
By default building Xen will cause a suitable version of Qemu to be downloaded and built.
When xen builds qemu
xen will build qemu by default if it is supported on your target.
Where Xen builds qemu
Qemu will build it under the
tools/qemu-xen-dir subdirectory of your xen source tree.
How xen builds qemu
When running make when building xen in the xen git tree the enabled qemu targets will be built and by default on x86 and x86_64 two targets are built:
* CONFIG_QEMU_TRAD: checks out the git tree defined by CONFIG_QEMU git://xenbits.xen.org/qemu-xen-unstable.git * CONFIG_QEMU_XEN: checks out the git tree defined by QEMU_UPSTREAM_URL git://xenbits.xen.org/qemu-upstream-unstable.git
Overriding QEMU URL and revision
If you'd like to modify the URL so that the another upstream version of qemu is used, and override the branch used you can edit your "xen/.Config.mk" file, for example:
QEMU_UPSTREAM_URL = git://git.qemu.org/qemu.git QEMU_UPSTREAM_REVISION = master
Building your own qemu
make xen tools
If it fail see below.
- Build QEMU upstream with Xen:
./configure --enable-xen --target-list=i386-softmmu \ --extra-cflags="-I$path_to_xen_source/tools/include -I$path_to_xen_source/tools/libxc -I$path_to_xen_source/tools/xenstore" \ --extra-ldflags="-L$path_to_xen_source/tools/libxc -L$path_to_xen_source/tools/xenstore" make
Troubleshooting compilation errors: If you get an error from configure like "ERROR: User requested feature xen ERROR: configure was not able to find it" then see this: http://xen.1045712.n5.nabble.com/Upstream-Qemu-With-Xen-configuration-problem-td4561779.html , ie. you need to point the paths for "configure" to xen source directory, not to xen dist directory.
Use with SeaBIOS
SeaBIOS support is now fully integrated into the Xen build system and is always used when using device_model_version = "qemu-xen".
If you want to build a version of SeaBIOS other than the default then you can override SEABIOS_UPSTREAM_URL and/or SEABIOS_UPSTREAM_TAG via .config. For reference the upstream SeaBIOS repository is [].
It's the PV drivers from KVM world. To use it for network, just use 'virtio-net' as a model:
vif = [ 'model=virtio-net' ]
You will need those kernel modules to use a VirtIO device
virtio_mmio virtio_pci virtio_net
SPICE / QXL
SPICE is another remote-display protocol and QXL is a PV framebuffer which uses the best of the SPICE capabilities. To activate SPICE you can add this in the VM config file (this works only with xl).
spice=1 spicehost='0.0.0.0' spiceport=6000 spicedisable_ticketing=1
With xen 4.4 usb redirection, vdagent and clipboard sharing was added:
- for use usb redirection add in domU's xl cfg spiceusbredirection=N where N is number of channels one for each usb device that can be redirected, max 4.
- for use spice vdagent add the line below in domU's xl cfg:
- for use spice clipboard sharing
QXL currently work under Xen only on windows but xl patch is available for testing. (check [SPICE page] for more information.)
Difference with qemu-xen-traditional
Missing feature from the good old qemu-dm
Currently, there is few missing feature that not supported by QEMU upstream, but the work is ongoing.
- VGA passthrough: Sometime (all the time?), simple PCI passthrough does not works for graphics card. The few things that are done in qemu-dm are not yet upstreamed.
New feature from QEMU upstream
There are some benefits from upstreaming the support of Xen to QEMU. We can now use:
- VirtIO as an alternative to Xen PV drivers
- SPICE, as a remote-display protocol instead of the old VNC.
- different kind of file format for a disc.
- the ability to connect several times to the VNC server.